NetGear FS108P ProSafe 8-Port 10/ 100 Switch with 4-Port Power over Ethernet The ProSafe FS108P providespower and data from a single point, using Power over Ethernet (PoE) over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100 Mbps link and four of these ports can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to 802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the ProSafe FS108P automatically determines PoE requirements, speed, duplex, and cable type using AutoUplink. Features: * Supply power to wireless access points and surveillance cameras over Cat-5 cabling * IEEE 802.3af power on up to 4 ports * 8 10/100 Mbps Ports with AutoUplink * Small, compact, quiet design fits on desktop or wall * Zero configurationrequired - power is automatically supplied to compliant devices Specifications: Network Ports: 8 auto-speed-sensing 10/100 RJ-45 ports Network Protocol and Standards: IEEE 802.3i 10BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3x Flow Control; IEEE 802.3af DTE Power via MDI PerformanceSpecifications: Forwarding modes: Store-and-forward Bandwidth: 1.6 Gbps Network latency: Less than 20 s for 64-byte frames in store-and-forward mode for100 Mbps to 100 Mbps transmission Buffer memory: 96 KB embedded memory per unit Address database size: 1,000 media access Addressing: 48-bit MAC address Mean Time Between Failure (MTBF): 190,000 hours ( 21 years) Status LEDs: System: Power, PoE Maximum Power Per Port: Link, Activity, Speed, PoE Active, PoE Fault Power Supply: Total Power Consumption: 44 W maximum 802.3af Power Consumption: 32 W maximum (Ports 1 4) 48VDC, 0.8A power output; plug is localized to country of sale Dimensions (H x W x D): 1.1 x 9.3 x 4.1 in.