Local Pick Up for New York City!

Alpine amplifiers may not be returned for exchange or refund, it can be repaired only!
Refunds will be given only for products that are received in unopened new condition and complete with all packing material, manuals and accessories in their original carton.

Part of the Alpine’s V-Power range, the MRP-F250 is a high performance versatile MultiMode amplifier. Pumping out 360 watts (Bridged power: 180 x 2 @ 4 ohms), the Alpine MRP-F250 can be used in 4/3/2 channel configurations. With an RMS output of 200 watts (50 x 4 @ 2 ohms), the F250 delivers excellent sound quality, throughout your music session. It features a built-in subsonic filter that delivers stronger, focused bass with cleaner output thereby improving the subwoofer performance. This filter also increases the life of the MRP-F250 by cutting off inaudible bass signals and reducing the unnecessary load on the amplifier. Additionally, the built-in adjustable crossover (HP/LP) lets you enjoy high-output sound with low distortions. It also eliminates the need for expensive external crossovers. Its Bass EQ circuit provides thumping bass without any distortion.

Its rugged heat sink lowers temperature and provides adequate heat dissipation to ensure optimum performance even while delivering extreme power output.  Additionally, the Discrete Pre-Amp Stage coupled with STAR circuitry lets you enjoy high-fidelity sound and minimizes spill-overs. The Continuously Adjustable Gain Control lets you adjust gain to maintain adequate performance across a range of input signal levels. MRP-F250 connects to any head unit and is an easy way to upgrade your original factory system. The Input Channel Selector lets you select any input source. Its Auto Over-Current Protection feature provides protection against surges in the input current. In addition, the 4-Layer Glass Epoxy PC Board adds rigidity to the MRP-F250. Its Power Screw Terminals and Speaker Terminals are gold-plated for increased conductivity.

• RMS Power: 50W x 4 (at 2 ohms)
• Brigded Power: 180W x 2 (at 4 ohms)
• 4/3/2 Channel Operation
• High Temperature Protection
• Subsonic Filter
• Bass EQ Circuit
• Adjustable Crossover (HP/LP)
• MOSFET Power Supply
• DC-DC PWM Power Supply
• Discrete Pre-Amp Stage
• STAR Circuitry
• Auto Over-Current Protection
• MultiMode
• Top Mounted Blue LED Power/Status Indicator
• Input Channel Selector
• Gold Plated RCA Input Connectors
• Continuously Adjustable Gain Control
• Speaker Level Inputs
• Gold Plated Power Screw Terminals
• Gold Plated Speaker Terminals
• 4-Layer Glass Epoxy PC Board
• CEA-2006 compliant

• CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 80dBA (Ref. 1W into 4Ohm): 40W x 4
• RMS Power (at 14.4V THD+N, 20Hz-20kHz):
  • Per channel into 4 ohms: 40W x 4 (0.08% THD)
  • Per channel into 2 ohms: 50W x 4
  • Bridged 4 ohms: 180W x 2 (0.3% THD)
• Bass Engine Sound Tuning:
  • Crossover Frequency : 50Hz - 400Hz HP/LP/Off(-12dB/oct)
  • Subsonic Filter (Fixed): 15Hz
  • Bass EQ Frequency (Fixed): 50Hz +12dB (Ch3/4) On/Off
• Frequency Response: 10Hz - 50kHz (+0,-1dB)
• Signal to Noise (S/N): 100dBA (Reference to Rated Power)
• Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)
• Input Impedance: 10k Ohm
• Speaker Impedance: 4 or 2 ohm Bridged
• Power Requirements: 14.4V DC (11V to 16V)
• Fuse Type: 15A x 2
• Dimensions (W x H x D): 9-9/64" x 9-31/64" x 2-23/64" (232mm x 241mm x 60mm)
• Weight: 2.7 kg.