|
|
Dynamat Dynaxorb (11800)
|
 |
Dynaxorb eliminates back-wave speaker distortion that colors sound and confuses imaging by using a combination of energy absorbent material and the technology known as "faceting".
|
|
$26.06
|
|
Dynamat Xtreme Speaker Kit (10415)
|
 |
Kit contains two 10" x 10" pieces of Dynamat Xtreme. Apply Dynamat Xtreme to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo.
|
|
$21.07
|
|
|
|
|
- Oversized Ceramic Metal Matrix Diaphragm woofer with foamed rubber surround (Plus One woofer is 30% larger than standard 6-3/4" cones)
- Infinity's C.M.M.D. technology delivers accurate performance with dramatically reduced distortion for incredibly lifelike sound. Additionally, the C.M.M.D. drivers can withstand extreme temperatures, moisture, humidity and sunlight.
- These speakers use cones approximately 30% larger than other speakers of the same size. This is accomplished by using a new basket design and hi-roll surround. The Plus One design offers greater bass output and a significant increase in efficiency. In addition, the C.M.M.D. cones virtually eliminate coloration due to cone flexing, resulting in less distortion and superior accuracy.
- The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
- 1" C.M.M.D. dome tweeter pivots 355° for improved imaging
Each speaker has a 1" C.M.M.D. dome tweeter that offers superior stiffness and damping compared to traditional metal domes. The UniPivot tweeter is angled (non-adjustable) and may be turned up to 355 degrees for optimum imaging and in-car frequency response. It is not made to turn 360 degrees. If the tweeter is turned 360 degrees or more, it will be damaged. - Outboard 2-way crossover (18 dB per octave, 3500 Hz high-pass/low-pass)
These speakers include computer-optimized, voice-matched crossovers. Each crossover features an 18dB/octave, 3.5kHz high-pass network for the tweeter and an 18dB/octave, 3.5kHz low-pass network for the woofer. - Crossover Input/Output Connections: Each crossover has an 11" input lead terminated with bare wire and two 18" output leads, one for the woofer and one for the tweeter, terminated with female quick-slides.
- Crossover Dimensions: L=3.458", W=1.734", H=1.087"
- Frequency response: 45-21,000 Hz
- Recommended power range: 2-75 watts RMS
- Peak power handling: 225 watts
- Sensitivity: 90 dB
- Top-mount depth: 2 7/16"
|