|
|
|
|
|
KIT-8 Amplifier Wiring Kit
|
 |
KIT-8 Amplifier Wiring Kit is complete power installation kit to connect your amplifier, includes everything you need to get your system going
|
|
$26.08
|
|
|
|
|
|
|
|
- 4/3/2 Channel Operation
- Both sides Terminal Layout
- Continuously Adjustable Gain Control
- DC Straight Design
- DC-DC PWM Power Supply
- Direct Batt. Terminal
- Direct Mode Selector Switch
- Discrete Pre-Amp Stage
- Duo - Feedback Circuit
- Gold Plated Insert Power Terminals
- Gold Plated RCA Input Connectors
- Gold Plated Speaker Screw Terminals
- Independently Adjustable Crossover (HP/LP/BP)
- Input Channel Selector
- Large-sized Fuse
- MOSFET Final Outputs
- MOSFET Power Supply
- MultiMode
- No Current Limiting
- Noise Elimination Coil
- Non-Fading Pre-Amp Output
- STAR Circuitry
- Solid Copper Bus Bars
- Subsonic Filter
- Top Mounted Multi Status Indicator
- Top Panel Adjustment of Crossover and Gain
Alpine amplifiers may not be returned for exchange or refund, it can be repaired only!
Refunds will be given only for products that are received in unopened new
condition and complete with all packing material, manuals and accessories in
their original carton.
|
10% THD Power (at 14.4V)
- Per channel into 4 ohms : 90W
x 4 (1kHz)
General
- Dividing Network : 50Hz-8kHz
HP/LP/BP (12dB/oct)
- Foot Print (W x H x D)in : 13”
x 11” x 2-3/8”
- Foot Print (W x H x D)mm :
330mm x 280mm x 60mm
- Frequency Reponse : 10Hz-50kHz
(+0,-1dB)
- Heat Sink (W x H x D)in : 13”
x 10 1/4” x 2 3/8”
- Heat Sink (W x H x D)mm :
330mm x 260mm x 60mm
- Input Impedance : 10k ohm
- Input Sensitivity (for rated
power) : 200mV ~ 4.0V
- Power Requirements : 14.4V DC
(11V to 16V)
- Signal to Noise (S/N) : 105dBA
(referenced to rated power)
- Slew Factor : greater than 5
- Speaker Impedance : 4 or 2
ohms(stereo), 4 ohms(bridged)
- Weight : 5.2kg(11lbs. 7oz.)
MAX Power (at 14.4V, EIAJ)
- Bridged 4 ohms : 320W x 2
- Per channel into 4 ohms : 120W
x 4
RMS Power (at 12V, 20Hz-20kHz)
- Bridged 4 ohms : 100W x 2
(0.3% THD)
- Per channel into 2 ohms : 50W
x 4 (0.3% THD)
- Per channel into 4 ohms : 40W
x 4 (0.08% THD)
RMS Power (at 14.4V,
20Hz-20kHz)
- Bridged 4 ohms : 160W x 2
(0.3% THD)
- Per channel into 2 ohms : 80W
x 4 (0.3% THD)
- Per channel into 4 ohms : 60W
x 4 (0.08% THD)
|