Local Pick Up for New York City!

The Profile California 800SX amplifier brings two channels of 200 watts RMS power to your ride at a price you can't refuse! This amp includes variable bass boost for extra low-frequency impact, and adjustable high- and low-pass crossovers to shape the signal sent to your speakers and subs.

The 800sx includes gold-plated inputs and outputs for maximum signal transfer, and protection against short circuit and thermal overload. Bridge this amp to a mono output, and you're dealing with 600 watts of constant power.

• Stereo, bridged mono or Tri-Way output
• 200 watts x 2 into 4 ohms
• 300 watts x 2 into 2 ohms
• 600 watts x 1 in bridged mode
• Requires 4-gauge power and ground leads
• MOSFET circuitry
• Power Light Strip:
  When power is on, the power strip lights up. It is made up of a seven-segment LED.
• Protection Circuits: This amp has three types of protection circuits; they consist of DC, short circuit and thermal protection. The red LED on the left side of the amplifier will light to indicate that the amplifier has gone into protection.
• Built-in Electronic Crossover Network with Continuously Variable Low or High Pass Operation:
  This amplifier includes a built-in variable high-pass and low-pass crossover. This crossover features a variable frequency selection (40Hz-130Hz) for precise high- or low-pass filtering. The slope is 12dB per octave.
• Adjustable Bass Boost:
  For added low frequency performance, this amplifier has a 0dB-12dB variable bass boost centered at 45Hz.
• Tri-mode Operation:
  This amplifier can be run in stereo and mono at the same time. This would allow the use of a pair of full-range speakers in stereo and a subwoofer in mono. A tri-way crossover, or separate crossover components, will be required for tri-mode operation.
• 2-ohm stable in stereo
• Low Level Inputs
• Gold-plated high-current cable inputs for maximum current transfer
• Adjustable Input Sensitivity
• Three 20-amp fuses
• Power and Speaker Ports

Controls

Left Side of Amplifier:

• Input Level Control: a rotary control that allows you to adjust the low-level input sensitivity of the amplifier from 0.2V to 5.0V
• Filter switch: allows you to select Low-Pass, Off (full range) or High-Pass
• Crossover Frequency Control: a rotary control that allows you to select a crossover point between 40Hz and 130Hz for either the low-pass or high-pass crossover
• Bass Boost: an adjustment knob that allows you to select a bass boost of 0dB to 12dB (centered at 45 Hz)

Inputs and Outputs

Left Side of Amplifier:

• Line Input: one set of gold-plated RCA inputs

Right Side of Amplifier:

• Fuse: Three 20-amp fuses inserted
• Battery (B+): set screw terminal will accept up to 4 gauge wire
• Remote: set screw terminal will accept up to 6 gauge wire
• Ground: set screw terminal will accept up to 4 gauge wire
• Speaker Output: set screw terminals will accept up to 6 gauge wire; the L+ and the R- terminals are used to bridge the amplifier

Specifications

• Peak Output Power: 400W x 2
• RMS Output Power (4 Ohms): 200W x 2
• RMS Output Power (2 Ohms): 300W x 2
• Bridged RMS Power (4 Ohms): 600W x 1
• MOSFET Power Supply: Yes
• Total Harmonic Distortion: <0.07%
• Signal / Noise Ratio: 105dB
• Switchable Crossover (High Pass/Off/Low Pass): HP/OFF/LP
• Variable Crossover Frequency: 40Hz - 130Hz
• Variable Bass Boost @ 45Hz: 0 ~ 12dB
• Dimensions: 17 5/16"W x 2 3/8"H x 9 13/16"D

Package includes

• Blue amplifier
• Three 20 amp blade fuses (mounted in chassis)
• 2 spare 20 amp blade fuses
• One 2.5mm Allen wrench
• One 3mm Allen wrench
• 4 self-tapping screws
• Instruction manual