Local Pick Up for New York City!

The MRV-F345 is a MultiMode amplifier that boosts of a unique and aggressive styling and can be used in 4/3/2 channel configurations. It is designed for high power output and excellent sound quality performance and is perfect for multi-channel environments.  The incorporated Bass Engine provides better control of bass by letting you boost bass frequencies at selected points and contour the bass width for the best performance. Additionally, Digital Control Center allows enables easier adjustment of Bass Engine functions and monitoring of battery voltage, power draw, system temperature and protection warnings.  The MRV-F345’s unique STAR circuitry minimizes distortion by separating high and low frequency signals, and redirecting them appropriately. In addition, the Discrete Pre-Amp Stage coupled with Non-Fading Pre-Amp Output make for high-quality amplification and extreme sound fidelity.

Armed with a Bridged power output of 300 watts (75 x 4 @ 4 ohms), the MRV-F345 delivers the highest of peaks with ease. Additionally, the RMS power output of 200 watts (50 x 4 @ 4 ohms) ensures continuously high sound output. The sound output is further increased, courtesy the high power V12 amplifier in the MVR-F345. The MRV-F345 is Amplifier Link ready and hence can be used in conjunction with seven other Amplifier Link-ready amplifiers. The Input mode selector switch allows easy switching between various input sources. The input connectors of the MRV-F345 are gold-plated for maximum conductivity. The Thermal Management Processor dissipates heat efficiently and ensures ensure optimum performance even during extreme power demands. Additionally, the Solid Copper Bus Bars further aids in heat dissipation. Its One Side Terminal Layout allows you to keep your connections in a neat and organized way. The Auto Over-Current Protection feature provides protection against surges in the input current.

• Bass Engine:
• Crossover network: 30Hz-400Hz HP/LP (12dB/oct)
• Variable tuned bass EQ: 45Hz +16dB (Ch-3/4)
• General-Amplifiers:
  • Frequency response: 10Hz-50kHz (+0,-1dB)
  • Heat sink (W x H x D): 13” x 2 5/16” x 8 11/16”
  • Speaker impedance: Stereo: 4 or 2 ohms
  • Bridged: 4 ohms
  • Input Impedance: 10k ohm
  • Input sensitivity: 0.2 V to 4.0V
  • Power requirements: 14.4V DC
  • Signal to noise (S/N): 96dBA
  • Slew factor: > than 5
• RMS Power at 12V, 20Hz-200Hz
  • Per channel into 2 ohms: 150 Watts x 2 (Ch-3/4)
  • Per channel into 4 ohms: 100 Watts x 4
  • Bridged 4 ohms: 300 Watts x 1 (Ch-3/4)
• RMS Power at 14.4V, 20Hz-200Hz
  • Bridged 4 ohms: 75 watts x 1 (Ch-3/4)
  • 300 Watts x 1 (Ch-3/4)
  • Per channel into 2 ohms: 150 Watts x 2 (Ch-3/4)

• Bass Engine:
• Crossover Network: 30Hz-400Hz HP/LP (12dB/oct)
• Variable Tuned Bass EQ: 45Hz +16dB (Ch-3/4)
• General-Amplifiers:
  • Frequency Response: 10Hz-50kHz (+0,-1dB)
  • Heat Sink (W x H x D): 13” x 2 5/16” x 8 11/16”
  • Speaker Impedance: Stereo: 4 or 2 ohms
  • Bridged: 4 ohms
  • Input Impedance: 10k ohm
  • Input Sensitivity: 0.2 V to 4.0V
  • Power Requirements: 14.4V DC
  • Signal to Noise (S/N): 96dBA
  • Slew Factor: > than 5
• RMS Power at 12V, 20Hz-200Hz
  • Per channel into 2 ohms: 150 Watts x 2 (Ch-3/4)
  • Per channel into 4 ohms: 100 Watts x 4
  • Bridged 4 ohms: 300 Watts x 1 (Ch-3/4)
• RMS Power at 14.4V, 20Hz-200Hz
  • Bridged 4 ohms: 75 Watts x 1 (Ch-3/4)
  • 300 Watts x 1 (Ch-3/4)
  • Per channel into 2 ohms: 150 Watts x 2 (Ch-3/4)