Local Pick Up for New York City!

The DRW-585 is an affordable dual auto reverse cassette deck offering a host of convenient, easy-to-use tape editing functions, such as Memory Stop, which lets you automatically stop the tape at any desired location, and High-Speed Dubbing to copy tapes from Deck A to Deck B at twice the normal speed. The DRW-585 also provides a backlight so you can easily monitor the remaining amount of tape. In addition, the audio circuit includes a Bias Fine Tuning feature to ensure that each tape type performs at its maximum potential . Of course, the DRW-585 is also equipped with Dolby B and Dolby C noise reduction systems, as well as Dolby HX Pro headroom extension to mi ni-mize noise from the tape and eliminate distortion in the high frequency range, providing crystal clear recording and playback.

• Both sides auto-reverse
• One side record/play
• Normal and high speed dubbing
• Dolby B & C noise reduction systems • Dolby Hx Pro headroom extension system
• Dual tape counters
• MPX filter switch for recording off FM
• Manual bias adjustment
• Infrared front panel remote sensor equipped

Full Selection of Play and Recording Modes (Single, Reverse, Relay, Timer Play, Timer Recording)

The DRW-585 provides a variety of playback and recording modes. Besides the usual Single and Reverse play modes, when the Relay Play mode has been selected and the Play button is pressed, deck A first starts playback, followed automatically by deck B after both sides of the tape in deck A have been played. This feature permits long, uninterrupted music playback. You can also connect an external power timer to the DRW-585 to allow you to wake up to your favorite tape, or to take advantage of the deck's Timer Recording mode.

Memory Stop

If you press the MEMORY button, turning on the Memory Stop function ("MEMO" is displayed), and then press the Rewind button, even during playback, the tape will rewind and automatically stop at the "0000" position on the tape counter.

Normal or High-speed Dubbing

Two dubbing modes are provided: Normal and High-speed. The latter mode copies tapes from Deck A to Deck B at two times the normal speed of tape travel.

Dolby B/C Noise Reduction

Dolby B reduces tape hiss by up to 10 dB, and Dolby C reduces tape hiss by up to 20 dB, perfect for recording from CD.

Manual Bias Adjustment Control

A variable bias adjustment is provided for greater control over recording characteristics. The center stop position provides the best results with most tape brands. The variable adjustment allows you to fine-tune the recording bias for the flattest frequency response with virtually any type of tape (Type I and Type II).

CD Synchro Record Function

The CD synchro record function allows you to easily make recordings from your Denon CD player without performing sepa-rate operations on both the cassette deck and the CD player.

Backlight

A backlight is provided to let you see the remaining amount of tape more easily.

nIndependent Tape Counters for Deck A and Deck B

Deck A and Deck B have their own tape counters so you can monitor the progress of both tapes simultaneously.

Specifications

• Head Playback 2 (Deck A and Deck B)
• Record 1 (Deck B)
• Erase 1 (Deck B)
• Motor Capstan DC servo motor x 2
• Wow & Flutter 0.08% wrms, 0.28% w.peak
• Frequency Respons e 20 Hz-19 kHz (25 Hz-18 kHz , 3 dB) (Metal Tape)
• Signal-to-Noise Ratio More than 74 dB (Dolby C on)
• Power Supply 120 V, 60 Hz
• Dimensions 17.1" (W) x 5 1/2" (H) x 10 3/4" (D)
• Weight 9 lbs.