- Extremely portable active loudspeaker system
- Built-in Mackie mixer for superior sound quality with:
- 3-channel mixer with 3-band active EQ
- Two high-headroom Mackie Mic/line preamps with 48V phantom power
- Instrument-ready input (no DI required)
- Dedicated stereo channel for keyboards, CD, MP3, iPods, etc.
- Neutrik Combo "line in" for linking or adding inputs
- XLR "thru" with mic/line switch for linking more SRM150s or direct send to main PA
- 150-watts of high output, Class-D power
- 5.25” premium-quality, full-range neodymium driver
- Frequency Response: 100Hz to 17.5kHz
- Complete system protection with built-in limiter
- 120 dB Maximum SPL@1meter
- Built-in top carry handle
- Integral aluminum heat sink
- Mic stand integration system for use with stand and boom
- Tough, impact-resistant, polypropylene enclosure
|
| System Specifications | | | Frequency Response | (–3 dB) 100 Hz – 17.5 kHz | | Frequency Range | (–10 dB) 60 Hz – 22 kHz | | Max SPL Long-term | 1m 110 dB | | Max SPL Peak | 1m 120 dB | | Mixer Section | | | Frequency Response | (–3 dB) | | Mic Input to Line Out (Gain at 0 dB) | 5 Hz – 40 kHz (+0, –1 dB) | | Input Impedance | | | Mic | 3 kohm balanced | | Hi-Z | 2 0 kohm balanced | | Instrument | 1 Mohm | | Line | 10 kohm balanced | | Stereo | 10 kohm balanced | | Maximum Voltage Gain | | | Mic Input 1 | 51 dB | | Mic Input 2 | 51 dB | | Stereo Input | 9 dB | | Maximum Input Level | | | Mic | –28 dBu, gain at +50 dB | | | +15 dBu, gain at +6 dB | | Line | –8 dBu, gain at +30 dB | | | +35 dBu, gain at –15 dB | | Stereo | +20 dBu, gain at 0 dB | | 3-Band Equalization | | | High | ±15 dB 12 kHz | | Mid | ±15 dB 2.5 kHz | | Low | ±15 dB 100 Hz | | Line Out Pad | –30 dB | | Common Mode Rejection Ratio (CMRR) | 55 dB 1 kHz, gain at unity | | Noise (20 Hz to 20 kHz BW, 150 ohm source impedance) | | | Equivalent Input Noise (EIN) | –129 dBu | | Residual Output Noise | –85 dBu | | (Line out, channel and master levels off) | | | Power Amplifier | | | Rated Power | 100 watts rms continuous, | | | 2 0 Hz to 20 kHz | | Maximum Power | 150 watts peak | | Rated THD | 0.0005 | | Cooling | Convection Extrusion | | Transducer | | | Diameter | 5.25 in/134 mm | | Voice Coil Diameter | 1.0 in/25.4 mm | | Sensitivity | (1W1m) 90 dB | | Nominal Impedance | 8 ohms | | Power Handling | 150 watts | | Frequency Range | 90 Hz – 20 kHz | | Magnet Type | Neodymium | | Safety Features | | | Overload Protection | Limiter | | Thermal Protection | Amplifier shutdown, auto-reset | | Construction Features | | | Material | Polypropylene | | Finish | Grey textured finish | | Handle T | op mounted | | Grille | Perforated metal with weatherresistant coating | | Physical Properties | | | Height | 8.0 in/20.3 cm | | Width | 11.2 in/28.4 cm | | Depth | 6.8 in/17.3 cm | | Weight | 7.6 lb/3.4 kg | | Mounting Methods | Mic stand mountable via the built-in socket on the bottom of the cabinet with the supplied adapter. | | AC Power Requirements | 100 VAC – 240 VAC, 50/60 Hz, 35 VA | | AC Connector | 3 -pin IEC 250 VAC | |
|