- Converts 12V DC battery power to 120V AC power
- 1800 watts continuous output power; 3600 watts peak output power (instantaneous)
- 4 outlets
- Ultra-compact, lightweight design with all-metal housing
- Diagnostic LEDs indicates low battery voltage level and load level
- Low battery alarm with auto-shutoff prevents deep battery discharge
- High-efficiency operation conserves batteries to prolong run time
- (6) 40-amp fuses protect inverter from overload
|
| Voltage compatibility | Compatible with 12VDC automotive or battery power sources | | Frequency compatibility | 60 Hz | | Output | | | Output watts | 1800W (continuous)/3600W (peak) | | Output nominal voltage | 120V | | Output voltage regulation | Maintains PWM sine wave output voltage of 115 VAC (+/- 8 VAC) | | Output frequency regulation | 60 Hz (+/- 3 Hz) | | Outlet quantity / type | 4 NEMA 5-15R | | Overload protection | Automatic overload protection shuts down inverter system in the event of overloads. Inverter and electrical system are further protected by set of 6 40A automotive input fuses. | | Continuous output capacity (watts) | 1800 | | Peak output capacity (watts) | 3600 | | Input | | | Input connection type | Set of 2 DC bolt-down wiring terminals | | Input cord length | User supplies cabling; minimum gauges for full load operation: 0 (16 ft max), 00 or 2/0 (20 ft max) | | Recommended Electrical Service | Requires 12VDC input source capable of delivering 200A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 250A battery system fusing is recommended. | | Maximum input amps / watts | Full continuous load - 200A at 12VDC, No load - 2.7A at 12VDC, Shutdown | | Battery | | | DC system voltage | 12V | | Alarms | Dual-function alarm indicates overload conditions or low DC input voltage of 10.5V or less. | | Unit Dimensions (HWD/in) | 4 x 6 x 15 | | Unit Dimensions (HWD/cm) | 10.2 x 15.2 x 38.1 | | Material of construction | Aluminum/sheet metal | | Form factors supported | Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information) | | Cooling method | Fan | | Environmental | | | Relative Humidity | 0-95% non-condensing | | TVSS grounding | Grounding lug grounds the inverter to vehicle or earth ground; user supplies cabling | | Appearance | Attractive, rugged, metallic gray color inverter system | |
|